中美合资
一、产品性能特点
该乳化剂采用先进工艺、科学配方合成,具有优良的乳化性能。适用于活性强的(很难拌和)石料而且性价比高,生产乳化沥青时不用调酸。能乳化各种道路石油沥青。在公路工程中用于沥青路面的稀浆封层、透层油以及基层封层。该沥青乳化剂生产的乳化沥青各项性能指标符合JTG F40-2004的BC-1标准。
二、主要技术指标
1.活性物含量: ≥70%
2.溶解度: 易溶于水
3.PH值: 4-5
4.拌和试验: 慢裂快凝
5.外观: 淡黄色液体
三、使用说明
各种材料占乳化沥青的比例
沥青 不小于55-60%(根据用途不同)
乳化剂(实物) 1.5-2.0%
水 至100%
四、包装、贮存及使用注意事项。
XT-R4L型阳离子慢裂快凝沥青乳化剂采用100Kg塑料桶或200Kg塑料桶包装。
本品放在阴凉通风处,贮存期三年以上。
注意防止进入眼睛,和接触皮肤。如发生请及时用流动清水冲洗。
I、Product properties
Advanced technology, scientific formula prepared by the emulsifier, has excellent emulsifying properties. Suitable for strong activity (difficult mixing) stone. Can be emulsified asphalt. For slurry seal, penetrated oil layer and basic layer of asphalt pavement in highway engineering. Emulsified asphalt performance indexes of the asphalt emulsifier production complies with JTG F40-2004 standard.
II、The main technical indexes
1 Active content: ≥ 70%
2 Solubility: soluble in water
3.PH value: 4-5
4 Mixing test: MK
5 Appearance: light yellow liquid
III、Instructions for use
Kinds of materials accounted for the proportion of emulsified asphalt
Asphalt not less than 55-60% (according to different purposes)
Emulsifier (real) 1.5-2.0%
Water to 100%
IV、Packaging, storage and use matters needing attention.
XT-R4L cationic MK asphalt emulsifier using 100Kg plastic barrel or 200Kg plastic barrels packaging.
This product is placed in a cool ventilated place, storage period of 3 years.
Pay attention to prevent access to the eyes, and skin contact. Such as the occurrence of please flush with water flow
一、产品性能特点
该乳化剂采用先进工艺、科学配方合成,具有优良的乳化性能。适用于活性强的(很难拌和)石料而且性价比高,生产乳化沥青时不用调酸。能乳化各种道路石油沥青。在公路工程中用于沥青路面的稀浆封层、透层油以及基层封层。该沥青乳化剂生产的乳化沥青各项性能指标符合JTG F40-2004的BC-1标准。
二、主要技术指标
1.活性物含量: ≥70%
2.溶解度: 易溶于水
3.PH值: 4-5
4.拌和试验: 慢裂快凝
5.外观: 淡黄色液体
三、使用说明
各种材料占乳化沥青的比例
沥青 不小于55-60%(根据用途不同)
乳化剂(实物) 1.5-2.0%
水 至100%
四、包装、贮存及使用注意事项。
XT-R4L型阳离子慢裂快凝沥青乳化剂采用100Kg塑料桶或200Kg塑料桶包装。
本品放在阴凉通风处,贮存期三年以上。
注意防止进入眼睛,和接触皮肤。如发生请及时用流动清水冲洗。
I、Product properties
Advanced technology, scientific formula prepared by the emulsifier, has excellent emulsifying properties. Suitable for strong activity (difficult mixing) stone. Can be emulsified asphalt. For slurry seal, penetrated oil layer and basic layer of asphalt pavement in highway engineering. Emulsified asphalt performance indexes of the asphalt emulsifier production complies with JTG F40-2004 standard.
II、The main technical indexes
1 Active content: ≥ 70%
2 Solubility: soluble in water
3.PH value: 4-5
4 Mixing test: MK
5 Appearance: light yellow liquid
III、Instructions for use
Kinds of materials accounted for the proportion of emulsified asphalt
Asphalt not less than 55-60% (according to different purposes)
Emulsifier (real) 1.5-2.0%
Water to 100%
IV、Packaging, storage and use matters needing attention.
XT-R4L cationic MK asphalt emulsifier using 100Kg plastic barrel or 200Kg plastic barrels packaging.
This product is placed in a cool ventilated place, storage period of 3 years.
Pay attention to prevent access to the eyes, and skin contact. Such as the occurrence of please flush with water flow
咨询热线:0519-85104581
公司地址:江苏常州市新北区高新科技园15号楼北区421室